JD Irving: Sussex Chip Plant
5 Wheeler Road
Four Corners, NB E4G 2W1 (506) 432-2880 Wood Purchase Rep. - Wendell Munn Mon - Thurs: 6:00AM - 2:00AM Fri: 6:00AM - 4:00PM Notice Effective Monday, November 29th loads containing more than one product (split loads) will only be accepted Monday to Friday between the hours of 8:00 am and 4:00 pm. If you have a split load containing pulpwood, make sure the pulpwood can be unloaded first. Effective January 1, 2021: The Sussex Scales will be closed each day from 5:00pm to 7:00pm until further notice.
|
Grade 1 Mixed Hardwood Pulpwood Quality:
1. Loads containing more than 5% rot shall be rejected. Individual pieces with greater than 50% diameter rot are unacceptable. 2. No undersize or oversize stems. 3. No forked stems/excessively crooked pieces. 4. No burnt/charred wood. 5. Wood must be delivered within 6 months of date cut (live trees at time of cut). 6. Total diameter of bolts cannot exceed 19" max outside diameter including defects from form and/or sweep. 7. Loads of 9' may contain up to 20% 8' mixed in. 8. Loads may contain all hardwood species except aspen/poplar. It is preferred (but not required) that maple species be sorted out and delivered in pure loads or separated on the truck. Grade 1 Maple Pulpwood Quality: same as Mixed Hardwood above, except: 1. Loads may contain sugar/red maple only, no other hardwood species. Grade 1 Birch Hardwood Pulpwood Quality: same as Mixed Hardwood above, except: 1. Loads may contain white/yellow birch only. White/yellow birch may be mixed together but other species must be physically separated if delivered on the same truckload. Grade 4 White Pine/Tamarack Pulpwood Quality: 1. No Hemlock/ Red Pine. 2. Wood must have been cut less than 3 months ago. 3. No more than 5% rot per load, individual pieces must not have more than 50% rot/defects. 4. No pieces so crooked that they exceed the 20" diameter limit to the feed chipper. 5. Limbs must be cut flush with stem. Grade 0 Spruce/Fir/Jack Pine Pulpwood Quality: 1. May contain up to 5% white pine/tamarack, which should be separated from spruce/fir. NO red pine/hemlock. 2. Wood must be delivered within 6 months of being cut. 3. No forked pieces or excessively crooked pieces. 4. No more than 2% rot per load, individual pieces must not have more than 50% rot/defects. *Pulpwood from NB private woodlots that has been delivered under a valid JDI contract and meets the following additional criteria will recieve a $3/tonne bonus on a load by load basis, as determined by JDI scaling staff.* 1. Spruce/fir only (at least 75% spruce). 2. Delivered within 3 months of being cut. 3. White wood only; not more than 2% rot and/or undersize per load. |
| Species | Product | Diameter | Length | Zone | Mill Price | Unit Measure |
|---|---|---|---|---|---|---|
| Maple | Grade 1 Pulpwood | 4" min, 18" max | 8' - 9' | All | $45.45 | Tonne |
| Birch | Grade 1 Pulpwood | 4" min, 18" max | 8' - 9' | All | $53.19 | Tonne |
| White Pine | Grade 4 Pulpwood | 3" min, 20" max | 8', 9' & 10' (+/- 6") | All | $28.03 | Tonne |
| Tamarack | Grade 4 Pulpwood | 3" min, 20" max | 8', 9' & 10' (+/- 6") | All | $28.03 | Tonne |
| Spruce/Fir/Jack Pine | Grade 0 Pulpwood | 3.5" min, 20" max | 96" (+/- 6") | 1 | $41.58 | Tonne |
| Spruce/Fir/Jack Pine | Grade 0 Pulpwood | 3.5" min, 20" max | 96" (+/- 6") | 2 | $43.51 | Tonne |
| Spruce/Fir/Jack Pine | Grade 0 Pulpwood | 3.5" min, 20" max | 96" (+/- 6") | 3-5 | $43.51 | Tonne |
*PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE*